Network Computing Devices LSQ-40L Manuel d'utilisateur télécharger pdf (Page 10)

2). Go to the first IP box and click in it. Enter the first number. Press TAB and

enter the second number. Repeat for the last two numbers.

3). Click on SEARCH FOR SCALES. If the network detects the scale, it will ask you

‘Do you want to add scale?’. Click YES.

4). The scales information should appear on the screen. If you have more than one

scale, repeat step 1.

NOTE: If you get an Enable message, the network did not find the scale. Either you

entered the wrong IP address, or the network is not configured correctly. If you

have more than one network configured, you may have to disable the other

networks.

CONFIGURE GENERAL PARAMETERS:

To set up for North America (USA) operations and currency, on the top of the

screen click on PARAMETER and then SYSTEM COFIGURATION.

1). Under the COMPANY INFORMATION tab, enter your stores information.

2). Under the SYSTEM DATA tab, enter the following information:

Current Symbol = $

Decimal Symbol = .

Decimal Number= 2

3). Click on SAVE the CLOSE.

Page 10

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 26 27

Pas de commentaire

Network Computing Devices LSQ-40L Manuel d'utilisateur Page 10